Any equipment that is powered by electricity is discharged from time to time. The xbox 360 joystick also needs recharging. To do this, you can use 2 ways.
We charge the xbox 360 joystick with a special wire and xbox
For the procedure, you must have a cable. You need to take the battery pack and do the following:
- Find the petal at the top of the AA battery pack.
- Lightly press the picture.
- Open gamepad.
- Insert the battery.
- Snap the mount.
- Connect the cable to the charging port.
- Connect the charging cable to the port for the gamepad.
- Activate the xbox 360 console.
- Look at the color indicator (if the red light is on, it means the device is being fed. Green indicates that the battery is ready for use).
While the process takes place, you can play. Signals are transmitted freely. But if you disconnect the cable, the device will stop feeding and it will discharge after a while.
To avoid problems, from time to time the xbox should be wiped from dust with a soft, flannel cloth or sponge. Chemicals cannot be used. Also do not need water.
How to charge the joystick from the network
It must be borne in mind that the output voltage at the joystick should have no more than 3 volts. To do this, you have to purchase a resistor or a special down-converter DC-DC. Then the input can be any voltage, usually 5 volts, and the output will always be 3.
Common parameters: 5V, 450mA. You should purchase a 3 volt power supply. The device must have a battery, otherwise it will not feed.
You can use the usb inputs on your computer if you have Microsoft Windows, Windows 10 software. Some use a recharge from a mobile phone, smartphone or iPhone. This is where power converters are needed. You can also power the joystick from the TV. For the procedure purchased a special cord, wire, cable, extension cord. On devices looking for the presence of corresponding inputs.
Leave Your Comment