How to enable joystick on xbox 360

The popularity of xbox 360 gamepads can only be envied. Back in 2015, one of the largest game stores held statistics on which gamepads are most often played by users. Statistics have shown that most often the games are launched using xbox 360 joysticks. Of the 28 million users, some are constantly faced with the problem that the device is starting unstable. Many have serious problems with the inclusion of the joystick. The article will tell you how to turn this device on.

Turn on the joystick on xbox 360

In order to enable the joystick on the console, you must click on the sync button. After the user will hold this button for 30 seconds, you should then turn on the gamepad button.

Near the button, which is responsible for the power supply of the device, there is an icon that shows the connection to the console, or to a PC. If the device was turned on correctly, one of the sections of the icon will turn green.

Important! If it was made incorrect inclusion, the window will display red.

In order to connect the next gamepad, you must perform a similar operation on it.

Joystick does not work after switching on

If the power indicator flashes red on the xbox 360 but does not connect, you can consider all possible causes of the incident. In most cases, it is required to take your console for repair to specialists.

First of all, you need to consider the room where the console stands. There are such situations when the included wireless equipment causes electromagnetic radiation, which prevents the synchronization elements from setting up their connection. If such equipment is still found, it is recommended to either turn it off or move it far away so that no interference occurs.

In addition, the possibility may be hiding in the problem of battery power. In this case, it is recommended to simply change the batteries, or charge it. To check, you just need to change the power supply on each gamepad.

Reference! Also, many users can use a large number of joysticks at the same time. The xbox 360 itself allows you to connect up to 4 devices at a time.

Also, many gamers are unaware that there is no fundamental difference in the new or old gaming device. Therefore, it is better to try to repair the old device than to acquire a new one.
How to troubleshoot

If the user failed to turn on one of the console's joysticks independently, it is necessary to check the correct operation of the batteries. Conventional control devices have simple finger batteries that can be easily discharged.

It is also possible the problem lies in the original batteries of the device. In order to avoid any problems with food, you should not buy the cheapest salt batteries. They are too quickly discharged, which will prevent the user from using the xbox 360 control for a long time.

It should be understood that the original xbox 360 batteries are too weak. That is why you should stock up on more expensive and roomy batteries. Original batteries can only be used within 1200 mAh.

The best way to check one of the gamepads is this method:

1. You must remove the original batteries from both gadgets.
2. After that swap.
3. If nothing happens, it is highly recommended to contact the service center. It is possible that the reason lies in damage to the power supply, or failure of the device.

In addition, experts advise separately to purchase chargers that will help to escape from an unpleasant situation in the form of discharging the device.