How to turn on the wireless headphones

Every year, manufacturers of headphones create updated models. Accordingly, the principle of operation may also change. On this basis, there are a lot of questions about the connection. That is why in this article we will try to understand in detail the important aspects that you should know when connecting this or that device.

Bluetooth pairing methods

Of course, the developers took care of future users and created the simplest steps for reproducing sound through the unit. Thus, you should only adhere to the following instructions:

1. First of all, the bluetooth function is activated on both structures. On headphones, this is done in this way: a button is pressed and delayed from about 8 to 10 seconds. Then the indicator should blink. As for the phone, this is the process of finding a certain item in the menu, which would indicate the inclusion of the desired task.
2. Then you can search for active equipment. This is usually done automatically. You only need to point to the desired line with a single click.

This is with regard to the question "how to turn on the bluetooth headphones." However, it should be understood that the main option is presented above. The outcome of events will directly depend on what base is installed on the cell phone.

Features of connecting to android

So, we will consider how to connect to the presented base. To do this, follow the procedure described below:

• The first thing to do is go directly to your smartphone. On it, go to the "settings" section.
• There you can easily find a string with the name "bluetooth". Accordingly, it must first be activated. To do this, click on the switch, which is located in the upper right corner.
• Further. You can start turning on the wireless headphone. In the instructions that accompany it upon purchase, you can find a way. Most often this happens by pressing the power button for 10 seconds.
• After that, the “search” window should appear on the device to scan for available devices.
• Now you can find the corresponding name and mark it in order to start pairing.

ATTENTION. Some models may have “protection”. To remove it, you must enter a special code, which can also be viewed in the instructions. Thus, further actions will occur automatically.

IOS connectivity features

By and large, there are no distinctive features from the previous method. The principle is almost the same:

• First you need to go into the settings of the operating system.
• Next, switch to the bluetooth section. In the same right corner there will be a button to click on.
• Further similar: look for the desired device name and join. Do not forget about the possible need for a pin code.

Separately, it is worth understanding a really common problem among users. Namely, that not every ios will be able to support certain technology profiles. This means that it may be necessary to upgrade and install the entire system directly. In addition, the equipment usually quickly spends its own charge, since it takes a lot of energy.

REFERENCE. It is possible to do the same manipulations in order to connect the network to other devices that work with the support of bluetooth.

How to connect headphones via Bluetooth to a laptop?

It is preliminary worth noting that not every laptop is able to connect through this technology. Therefore, first you need to check the device. If nevertheless your unit does not have such an opportunity, you will have to purchase an external module in advance, install special drivers, and only then use it. Actually, the main process starts as follows:

• First you need to click on the combination of windows + R. After that, a window will appear, in the line of which you must definitely write "devmgmt.msc". Then, to save the information, click on “ok”.
• With the correct outcome of the events, a list is displayed in which you should find the desired function and the names of your devices.
• Now that the material has been verified, we can proceed to the main stage. Namely: mark the power button directly on the headphones and hold it until the indicator lights up.
• Next, in the lower right corner of the monitor, select the bluetooth icon and click on “add device”.
• A list of possible structures will be available to you, where you need to find your unit and continue the procedure.
• In conclusion, you just need to follow the prompts that will be broadcast. When requesting a confirmation code, you will need to enter “0000”, since such a password is considered standard.

How to connect Bluetooth wireless headphones to a computer?

Each option has its own common features in the process, so to pair a PC with another device, you should follow the sequence of steps below:

• As elsewhere, you need to turn on the headset using the dedicated button. The time to continue pressing usually varies from 10 to 15 seconds. After that, the unit will be available for use.
• Now refers directly to the main equipment. You need to find the icon in the system tray. Location - The bottom corner on the right side of the desktop.
• We mark "add device". The computer will automatically begin the search for possible equipment and, accordingly, will offer you a list with their names. You just have to choose the desired unit and proceed to completion.
• The last step will be one click on the "next" button.
• Further, as always, everything depends on the design model. Again, it may be that a confirmation message appears.

IMPORTANT! This applies to both a laptop and a personal computer: in the absence of the ability to connect, you will need to install the driver.

Of course, this is usually done independently from the software database, however, errors can also occur. Therefore, you will need Windows Media Center. In addition, it is recommended that you double-check the documentation for the equipment, as maybe you entered the wrong password. Do not forget that errors can also be eliminated by rebooting the PC or by turning the headphones off / on.

How far can Bluetooth headphones work

If you previously used the presented function, you probably noticed that at a certain distance the device works better or worse. Indeed, with direct visibility, the equipment can recognize another at a distance of up to 50 meters. Speaking about the location in enclosed spaces, it is worthwhile to understand that the available length is significantly reduced, namely from 10 to 20 meters. If you believe modern manufacturers, we can mention that some devices are capable of supplying a range of up to 100 meters. Thus, it is important to understand that everything directly depends on the model and its developer.

REFERENCE. If we compare the old types with the updated ones, then it is clear that the difference between them is quite large, and it is primarily recognized in the characteristics.