Laminate wall decoration

Recently, the laminate on the walls is increasingly in demand. It is no longer possible to perceive it solely as a floor covering. Modern designers have begun to use wall laminate in their work. For wall decoration, both a floor laminate and a special wall covering, which appeared relatively recently, are suitable. Laying and cladding walls with your own hands using a laminate is not a very difficult process. not even accessible to a professional.

Laying laminate on the wall

Laminate is an excellent material for walls, because for years it has been tested as a floor covering, which means that you can unconditionally declare its strength and wear resistance. Therefore, many decide to sheathe laminate walls vertically on their own.

A modern laminate gradually begins to displace wood panels, because it has a number of advantages.

The advantages of laminate wall decoration:

1. Environmentally friendly material, which includes a large amount of wood;
2. Durability is one of the main advantages of flooring (exclusively subject to proper operation);
3. A wide range of colors and textures. Due to this, the most daring design decisions appear;
4. Installing a laminate on the walls can not even be a professional;
5. The material is easy to operate and quite practical.

But it is also necessary to say about the shortcomings, which, by the way, are much smaller.

The material is quite difficult to tolerate temperature fluctuations and humidity, which is why it is impractical to use it in the bathroom and in the kitchen.

How to glue a laminate to a wall

To fix the laminate, you can use the glue or frame method. The first method can be used both with adhesive fastening and with locking.

REFERENCE! Glued laminate is extremely rare on store shelves, but if you have purchased this kind of coating, then gluing it to the walls must be done exclusively with special glue.

For the castle-type laminate, “liquid nails” can be used. It should also be added that quality work can only be obtained on a completely flat surface. To do this, before you start laying the panels, you must either align the walls by plastering, or put drywall sheets.

In no case is it recommended to lay the laminate on uneven walls. First you need to make a crate with a step of no more than 50 cm. To do this, you can use either a galvanized profile or a bar.

After this, the boards will rest on the profile. It is necessary to mount the coating on liquid nails. There must be a dressing of the transverse joints.

Instructions on how to fix the laminate to the wall

First of all, the wall is leveled with a start putty. After this, the surface must be left to dry for 1-2 days. This is to ensure that wood panels adhere better to the surface.

Pay Attention! Laminate is a rather heavy material, therefore it is impossible to neglect the preliminary primer in any case.

After that, you can begin to lay the laminate.

Work starts from the bottom left corner. Glue is applied to the first panel. After this, the panels are glued one after another.

Attention! Use only high quality materials for work!

Some brands of glue need to be allowed to wind off for a few minutes, and then put the wood panel on the wall again.

Keep in mind that when laying the laminate it is necessary to leave a gap between the laminate and the floor. After finishing work, this space is filled with a plinth.

Control the work done with the help of a level. Tap the glued panels periodically with a rubber mallet. If at the end of the row it is not possible to fit the wooden panel, then it can be cut with a metal knife. The second row begins with the half of the panel, which is also trimmed with a hacksaw.

Note! Wooden panels must be staggered!

Thanks to this, the wall will look stylish and will last for many years.

If you lay the laminate without weathering the glue, then after three rows you need to take a break and let the glue “seize”. Laminate is quite heavy, and under weight can move.

How to fix a laminate on a drywall wall

For the installation of panels on drywall, “liquid nails” are required. Before attaching the laminate to a normal wall, it is necessary to level the surface. During the fastening of panels to drywall, this step is skipped, because it is already perfectly smooth.

A shield is assembled from the laminate and glued to the drywall surface. In order for the surface to serve longer, it is necessary to lubricate the grooves with a sealant, this will prevent the ingress of contaminants.

This is a more time-consuming process of fixing the laminate to the wall, but at the same time much more reliable and durable. It is possible to make the crate on the drywall surface and on a regular wall.

For this work it is necessary:

1. hammer;
2. level;
3. square;
4. ruler, simple pencil;
5. hacksaw;
6. expansion wedges.

After you calculate how much you need to work, get 15% more to get enough.

• First you need to make a frame of rails. They should be perpendicular to the spaced laminate panels. They need to be fixed with nails.
• Before you begin to attach the material to the drywall surface, you must select the starting point. If you plan to cover the entire wall with panels, then start work, it can be found from the ceiling to the floor. Leave some space between the wall and the ceiling in the size of one board. If you plan to fix the laminate only on the bottom, then you need to start work from the bottom.
• After this, the boards are attached one after another. To do this, you can use both special glue and “liquid nails”. Each panel is tightly pressed and fixed. At the very bottom, it is imperative to leave room for drywall, which will be attached at the very least.

It is not so difficult to make a wall with a laminate finish on drywall and even a beginner can cope with such work. The most important thing is to choose high-quality material and follow the instructions.

Recommendations

Quality laminate can be purchased at an affordable price. When buying a wall covering, you need to consider many nuances:

• If your apartment has pets that can ruin the new laminate panels, then do not choose too expensive models.
• When choosing a laminate, choose a model that will work well with interior items. For a small room, it is better to choose a laminate of a light shade, in this case it is better to roll back from variegated colors.
• The adhesive laminate can only be glued on a flat surface. If the surface is too uneven, then you can make the crate.

Today there is such a variety of laminate that you can create unique ideas for the design of the premises.

For example, using the walls with a laminate in the corridor, you can improve sound insulation. Laminate flooring is excellent to clean from dirt, so it is a suitable option for the corridor. Recently, the laminate is increasingly used for decoration in the corridor due to its wear resistance and durability.

REFERENCE! In the corridor you can make zoning or compose the material in two heyday. As a rule, the walls are not completely covered with laminate.

If you want to make the walls of the laminate on the balcony, then do not forget about humidity and temperature changes - this is what the coating is so afraid of. Therefore, it is necessary to choose a laminate, which has an increased resistance class. On the balcony, you can completely make the walls covered with a laminate, and you can combine with other wall coverings.

An excellent design solution is to use a laminate at the head of the bed. You can use any laminate in the bedroom, because there are no temperature differences in this room.

It will look stylish if you select textiles of the same color as the wall covering. It looks beautiful if the laminate on one of the walls is white and the floor is milky. An excellent design solution for the bedroom is a rolling laminate from wall to floor.

In the living room and the hall, a laminate is also often used as a wall covering. You can make the installation of the laminate either on one of the walls, or on a certain area near the fireplace or TV. A combination of gray laminate and white furniture looks very stylish.

The range is so large that now you can use the laminate as a wall covering, even in the bathroom. Because in the bathroom, a sharp jump in temperature is recommended to choose a waterproof laminate. In the bathroom you can use any color of your choice. An excellent option is to highlight the smallest wall in the bathroom with a laminate.

The attic can also be finished with a wall laminate. Often this room is not heated, and therefore there can be sharp temperature jumps. We recommend starting with insulation, and after installing the laminate. In addition, the backlight laid directly in the laminate itself looks original.

When choosing a laminate for the kitchen, you must choose options above 22 class. Because, as an ordinary laminate, it is afraid of high humidity and sudden temperature changes. The kitchen can be laminated with wood imitation tiles.

Installing the laminate on the wall is quite simple. The most important thing is to approach work responsibly and choose high-quality material. Remember that the laminate does not endure haste! If you follow all the rules for installing a laminate, then the interior will delight you for many years.