How to attach the LED strip to the kitchen set

Lighting in modern apartments and houses is mounted in different ways and has a different design. Kitchen, refers to a place where it is desirable to install additional sources of lighting. The correct distribution of light energy will turn routine kitchen work into a pleasant process. One of the interesting options for additional illumination is the LED strip, which you can independently attach above the working area to the kitchen set. The advantages of this type of backlight can be considered durability and resistance to external damage.

How to stick LED strip to the kitchen set

LED strips are sold in rolls five meters long. For further installation, you should purchase fasteners, glue and a power supply. The backlight must be connected through a unit that lowers the voltage. Low-voltage products do not require a complete supply of energy. Blocks come in different capacities and sizes. The strips themselves are cut, so they need to be connected with each other with special fasteners.

Super glue can be used to attach to the headset. In this case, the LEDs will not peel off even after the expiration date. Many products already contain an adhesive layer hidden under a protective film. For the best effect, it is recommended to add double-sided tape for high-quality fastening. On one side, tape is glued to the surface of the headset, and LEDs are attached to the other.

Reference! A varied color palette of additional power sources will decorate any interior of a modern kitchen. The backlight can be made in white, yellow, green, blue and red colors.

Important points when working

During the work of attaching the tape, you need to ensure that it does not twist too much, otherwise the electrical components will be damaged. If it is purchased for the kitchen or bathroom, then you should give preference to models that have a high class of protection against moisture and dust. Then, during cleaning, along with the cabinets, you can also wipe the LEDs. To illuminate the lower part of the kitchen, it should be noted that during cooking and washing dishes, the likelihood of water getting on the tape increases. And for the living room, for example, you can buy cheap LEDs.

When cutting and connecting parts of the tape, it is necessary to ensure that the integrity of the conductive tracks is preserved. The brightness of the LED strip is selected depending on the purpose. If you want to illuminate the workplace directly, it is advisable to purchase more powerful products.

Attention! A wide variety of LEDs allow them to be mounted on almost any surface of not only the kitchen, but also in the living room, living rooms and bathroom.

Which glue to choose

In order to glue the LEDs to the surface of the headset, you can choose one of the proposed options:

  • double sided tape;
  • Super glue;
  • adhesive layer on the substrate;

Many LED models are sold with a layer of glue on the side to which the surface of the headset is glued. Usually glue is protected by a special film. To remove the protection, you just need to pick up the edge of the film with a knife and remove it. There are times that the tape is peeled off from the surface. This happens due to the poorly prepared surface of the headset or when choosing poor quality adhesive tape or glue.

Attaching the LED strip to the headset in the kitchen: step by step

In order to properly fix the source of additional lighting to the headset, you must follow these steps:

  1. The first step is to measure the area where the tape will be attached. To do this, you can use ordinary roulette. Data should be as accurate as possible.
  2. The place on the headset where the LEDs will be glued needs to be washed thoroughly, cleaned of dust and dirt and degreased with ordinary alcohol or an alcohol solution, then it should dry.
  3. If there is an uneven surface, it is first recommended to attach a special strip of aluminum to the carnations, and the tapes are already attached to it.
  4. To stick a self-adhesive tape, you just need to remove the protective film and distribute the LEDs on the surface of the headset. If there is no adhesive layer, you can use ordinary super-glue or double-sided tape.
  5. The power supply is selected based on the type of tape. You need to fix it in the corner of the headset, it must be securely hidden, and not subject to mechanical damage, and prevent water from entering. First, the unit is connected to the network, and then to the LEDs.

Important! All joints of the wires must be closed with special caps or wrapped with insulating tape. Thus, you can protect yourself from electric shock. Subject to safety precautions, fixing the product to the headset in the kitchen will become safe.

LED strip will be a great additional lighting for any kitchen. The ease of installation and connection makes such a source of additional energy quite popular. Attaching LEDs to the headset in the kitchen on your own will not be difficult, and you will not need any specific skills. But the kitchen will become a cozy and comfortable place where it is pleasant to spend time with the whole family at dinner.

Watch the video: How to install LED Strip Lights Under Cabinet LED Strip (March 2024).

Leave Your Comment