Do-it-yourself manicure table: drawings and sizes

Of course, self-designing and directly assembling a manicure table is not only saving money, but also getting pleasure in the process of work. But in any case, it is necessary to take into account certain nuances, and of course, a table for manicure is no exception. In this article, we will consider the main aspects and rules that each master should adhere to when assembling the product.

The choice of sizes of manicure tables

As for the optimal parameters of a do-it-yourself manicure table, the drawings and dimensions of which are mostly standard, these are the following indicators:

• Height is 750 centimeters;
• Width - 460 cm;
• Length - 950 cm.

In addition, you can calculate the value of the built-in self-made manicure table cabinet, where it is convenient to store the necessary tools for work. Usually this is 400 by 300 centimeters, where the height and width respectively make up the first and second value. Thus, you can safely create your own standard table, the dimensions of which are checked by a number of people.

Of course, you can create your own sketch and navigate it. However, here you should not forget about the change in all indicators in the event that you decide to change one of them. This is necessary in order to maintain proportions and not to lose the stability of the entire structure.

Drawing up a product

After you have decided on the dimensions, you can safely proceed to create a sketch. Some people miss this point in the process. But it is he who helps not to stray from the right path.

This means that even with problems, if, for example, you forget the part, you can always refer to the diagram.

Rules for the assembly of manicure tables of various sizes

It is very important to prepare for the process, namely to collect all the necessary materials and tools for the table for a manicure with your own hands. These include:

• Screwdriver;
• Pencil;
• Tape measure or measuring tape;
• Electric jigsaw;
• Scissors;
• Screwdriver;
• Keys (IMPORTANT! They must be with six faces);
• Iron;
• Chipboard.

After everything is ready, you can proceed to the main stage. All actions are recommended to be performed in the proposed sequence, otherwise the product may not acquire the desired appearance. So, you should carry out the following manipulations:

1. First you need to fix the ends on the stops. Next, cut a small part and attach it to the surface of the PVC, while simultaneously applying an iron on top. It is very important to remove the heating agent in time, namely, at the moment when the glue starts to melt a little, and the space sits down. ATTENTION! All actions should take place at an accelerated pace, since the glue can cool quickly, which is undesirable in our situation. Those edges that remain can be eliminated by cutting.
2. Turning to the sides, you should make holes. They will be needed for dowry. As a result, you should get two recesses on one part of the cabinet and two on a large shelf. Then you can safely fix the product with glue.
3. We turn to the eccentrics. To do this, retreat 15 millimeters in depth where there is a large shelf.
4. Now you need to deal with the back wall. Namely, to carry out the connection of dowels. First you need to drill 4 holes. We do the same with the side parts. IMPORTANT! Remember to add glue when fixing parts. This will provide additional reliability for the entire structure.
5. The next step is to connect all the parts to each other, namely the sidewalls with the upper side. This is done, thanks to a specially designed mechanism, counterclockwise.
6. Then it is advisable to pay attention to the recesses for the loops. They should be at a distance of 20 centimeters from the edge.
7. We turn to equipping the bottom. To do this, turn the product over and drill a place for dowels. You can fix the product with screws.
8. After that, you can think about the legs. They can be either purchased ready-made in any hardware store or made at home with the help of small bars. To attach the named element, it is worth stepping back from the edge of the table about 20 centimeters. It is recommended in advance to arm yourself with a pencil and outline the proposed places for the legs.
9. Next, the main part is fixed in the countertop. The whole process can be diluted using metal corners. But this is done in cases where it will not be necessary to further move the table around the room.