Do-it-yourself bed for bed patients

There are many ways that can facilitate the care of sick people. In this article we will try to consider one of them in detail.

How to make a bed for bed patients with your own hand

Since it is in the bedroom that a person spends the greatest time in his life, it is necessary that it be as convenient and practical as possible. This can be achieved by self-constructing a medical bed. This is easy enough to do, and the process is straightforward. Moreover, the items that are required for the manufacture of structures are considered affordable.

Drawing up a drawing

The bed itself for bed patients with their own hands, the drawings of which can be found on the Internet, will depend on its purpose. The easiest option is to create a small support under the back of a recumbent. The facility can be used at mealtimes.

This provides maximum comfort for both caregivers and patients. In addition, it improves the blood circulation of the patient and gives the muscles the right load. When creating a scheme for a future product, it is worth considering the size of the original bed. Their width parameters must strictly correspond.

Preparation of materials and tools

A bed for bed patients with their own hands begins to do with the collection of necessary items for the work process. First of all, the following materials will be needed:

• One sheet of plywood - as a reference section - with indicators of 860 * 520 * 5 millimeters;
• The same two parts, only with dimensions of 900 * 800 * 10 mm;
• Four plywood strips 860 * 40 * 5 mm to make stops;
• Sandpaper.

As for the tools that will help to make a bed for bed patients with their own hands, these are:

• Hinge in the amount of 4 pieces;
• 36 nails with 12 millimeters;
• Joiner's glue;
• Transparent varnish specially designed for furniture;
• Self-tapping screws;
• Roulette;
• Electric drill;
• Screwdriver;
• Hammer;
• Drill;
• Sander.

Assembly assembly

When all the items are ready, you can begin the main process - the preparation of materials and their construction of the entire structure.

1. First you need to arm with polishing and use it to process the plywood layers. It is worth paying special attention to the protruding places and possible sharp edges of the product.
2. Next, you need to take a drill and drill the central holes. It should be smaller than the diameter of a countersunk head screw. Of course, for convenience, you can pre-outline the markup with a pencil. After the described manipulations are done, you should screw the hinges into the formed recesses, and fix the fundamental part on them.
3. Using glue, it is worth lubricating all available plywood strips. One of them is a spacer. Next you need to attach them to the inner side of the surface. This is best done as close to the border as possible. Then everything is fixed with nails. All products must be fixed so that between them a space is formed at a distance of 70 millimeters.
4. It is important to make sure that the adhesive is dry and the products are nailed tight and securely. The entire structure must be made as high quality as possible so that it can be used for many years.
5. In order to avoid possible damage to the structure in the future, it is recommended to use varnish to protect. It is desirable to cover it with two layers. This guarantees long-term use.

As a result, you get an indispensable device that helps a sick person to take a half-sitting position, for example, to eat, chat with relatives or watch TV. In addition, this arrangement of the body is great for the prevention of heart disease.