Is it possible to dry the phone with a hairdryer

With a situation when the phone gets wet, everyone can face. A mobile device may fall into a sink or toilet. In most cases, this leads to a malfunction of the phone, which means that you need to buy a new one. A few tips will help in solving this problem.

With quick orientation and no panic, the mobile phone may remain in working condition. In some cases, independent actions are sufficient, without contacting a specialized service.

First of all, you must immediately remove the device from the water. Headphone ports, charging, and other openings allow moisture to pass through quickly. After removing the case, carefully wipe it with a paper or terry towel, remove the battery from the phone.

IMPORTANT! Take care not to clog the port aisles of towels or paper.

SIM cards are quite resistant to damage, including being under water, but it must also be removed and wiped. We do the same with memory cards (if any).

After disassembling parts, you must check the phone for damage when under water. Modern smartphones are equipped with a special white indicator. It is located in the battery connector. If the indicator turns pink or red, then the device is seriously damaged. Repair work required.

After extraction, we place all components on a paper or terry towel. The device and its parts should be periodically turned over so that moisture that has got inside finds its way to the surface.

At the initial stage, these actions will be enough to dry and reanimate the mobile device.

IMPORTANT! If the phone was connected to charging during a fall, it is strictly forbidden to pull it out, since water is a current conductor. You should seek help from a specialist.

Fen has long received the call of the chief assistant for each girl. With it, you can quickly dry and style your hair. Many use a hairdryer to quickly dry clothes.

When the phone falls into the water, the thought of drying it with a hairdryer comes one of the first. However, such actions should be abandoned - you can’t blow dry the gadget with a hairdryer. Blowing with a hairdryer, even in gentle mode, will contribute to the deterioration of the situation. Incoming air drives water droplets deeper into the casing. This leads to a malfunction of the device. After such a repair, you will need to purchase a new smartphone.

Exposure to hot air from a hair dryer can melt some of the fragile components of your phone. Hot air will accelerate the oxidation of individual parts, the likelihood of corrosion will increase.

Conclusion: the use of a hairdryer to dry a mobile device should be discarded.

After all components are removed and disassembled, it is better to leave the device for a while. You can use some methods that will help speed up the drying process.

A few additional methods:

1. A vacuum cleaner, unlike a hair dryer, can help repair the device. Remove the brush from the hose, turn on normal mode. During the drying process, you must regularly turn the appliance over so that excess water does not remain inside. This process is quite lengthy, but the hose will reliably remove excess moisture from the housing. It is important not to direct the hose too close to the appliance.
2. Instead of a vacuum cleaner, a fan is also suitable. The phone should be located a short distance from the fan.
3. Excess liquid is well absorbed by silicone balls or rice. We collect rice grains into the container, place the device inside, and also top with rice. It is important to create a condition of tightness, so close the bowl with a lid. The container should be left overnight. Such a process is one of the longest, but more effective.

IMPORTANT! Putting a wet device in a microwave is strictly prohibited. Such actions will lead to the final failure of the device. In addition, a telephone placed inside the microwave chamber may cause an explosion.

If after preliminary repair the smartphone still does not turn on, it is necessary to check the battery performance by connecting it to another device of this model. If the battery is working, the problem is bad chips. Due to moisture, the boards quickly corrode and oxidize. In this case, specialist advice is required.

Without a mobile phone, the life of a modern person has become almost impossible. If neglected, the device may suffer from a lot of moisture. Knowing the correct sequence of actions, you can fix the phone yourself.