The temperature of the hot water in the cooler

Coolers are a household appliance that has tightly entered our lives. With its help, you can quickly and simply cool and heat water to a certain temperature. They are floor and table.

How it works, heating the water in the cooler

The modern market is represented by a wide variety of equipment for heating liquids, but most of them work on the same principle. The equipment consists of:

1. Tank for placement of hot liquid. As a rule, this capacity is from 0.6 to 3 liters. A heat insulator is made, which allows you to keep water warm longer, energy is saved.
2. A heating element. Basically, its power ranges from 400 to 1200 watts.
3. Boards responsible for the performance of the equipment.
4. Two temperature sensors. At the lower temperature of operation - 70-86ºС, but at the top this indicator is at the level of 92-96ºС.

When the heating function is activated, the equipment begins to work on its heating. It heats up until the upper sensor is activated. Further, the device turns off, and the liquid gradually cools, but not less than the temperature of the second, lower sensor. Heating takes place in just 1-2 minutes, after which the system turns off and is idle for about 10-20 minutes.

The more often you draw hot water, the sooner the next batch of water will heat up.

IMPORTANT. Do not turn on the equipment without a bottle installed, this will soon lead to the heating element coming out of working condition. This failure is not a warranty case.

Please note that the life of the equipment is also affected by the quality of the fluid used, the timeliness of special maintenance work.

To what temperature does the cooler heat water

What is the temperature of hot water in the cooler? As a rule, most models of equipment are turned off when the liquid is heated to 92-96 degrees.

REFERENCE. Using a conventional kettle to heat water, it boils when it reaches a temperature of 100 degrees. But in fact, its average temperature is 90-95 degrees.

What is the turbo heating function?

In recent years, modern manufacturers of this equipment have begun to produce models that are additionally equipped with the “turbo heating” function. Consequently, coolers received increased power. They are also equipped with an LCD display and a special button so that you can enable or disable the “turbo heating” function if necessary.

REFERENCE. Conventional cooler models are equipped with Tenes with power from 400 to 600 watts, advanced models received Tenes with power of 700 watts.

Many people wonder - is it possible to brew tea with purified liquid heated in a cooler? If possible, then what kind of white foam forms on the surface of the drink?

It is safe to say that that foam is absolutely safe for human health and does not indicate that the drink is of poor quality. Dissolved gases are present in the water, and during boiling water, they evaporate. As is already known, the water in this equipment is not brought to a boil, and gases are released at the stage when the tea leaves get into the water. Leave the drink to infuse for a couple of minutes, and the foam will evaporate by itself.

You can make tea using the water heated in the cooler. Especially when you consider that some types of tea need to be brewed with water heated to 90 degrees, then this equipment will be the best replacement for the teapot.

To receive only high-quality and clean drinking liquid, it is necessary to timely carry out maintenance and cleaning of equipment. Be careful, because some types of bacteria do not die even when boiling water, but multiply in the aquatic environment very quickly.