How to wash the kettle from grease outside? This problem was faced by many housewives. Just a few weeks after the start of operation, the outer surface of the kettle is covered with an unpleasant-looking and touch layer. This is due to the fact that food is being prepared next to it, which means that they are constantly “poured” with steam with fatty impurities from neighboring pots. So how can you return the kettle to its former beauty?
The process of preparing for outside cleaning
Any process must begin with cooking. First of all, it is worth assessing the degree of contamination of the kettle. If the spots are small and fresh, it will be enough just to wash the surface in warm water. Ordinary detergents or soap can also be used. When such a procedure does not help, resort to other methods, using additional funds.
Before starting the cleaning procedure, you need to prepare everything you need, namely:
- large capacity, the volume of which allows you to completely immerse the kettle in it. Use boiling out or a metal bucket;
- a sponge, you will need both with a soft and a hard surface;
- old toothbrush. With its help it is easy to wash inaccessible places - areas around the spout and in the upper part of the utensil;
- a towel or a suitable rag. After using any product that does not even contain chemistry, the dishes must be thoroughly washed and rinsed under running water;
- selected to remove contaminants. Here it is necessary to approach the solution of the problem based on the properties of the kettle itself. The modern chemical industry offers liquid and abrasive products. The second option is not suitable for surfaces that are afraid of scratches.
When everything is prepared, you can start cleaning. Do not forget about water.
Important! It is better to use a warm or hot liquid to dissolve fats.
Non-chemical methods of cleaning the kettle from fat
In household chemistry stores there is a large list of tools to help remove any impurities. But many housewives prefer "environmentally friendly" ways. And there are a lot of such. For cleaning use ordinary soda, vinegar, citric acid and other products and products that can be found in any home.
Soda
A simple and affordable way. Baking soda is available in every home, and it copes with greasy spots and other impurities. Before starting the procedure, the kettle is heated. Next, it is placed in a sink or a suitable container and rubbed with the hard side of the dishwasher sponge with the addition of soda. To succeed, you need to make an effort and clean the kettle thoroughly. But the result will be, and also safe for human health. After the procedure, the kettle is washed with running water from the outside and from the inside.
Vinegar Soda
Another proven way. In this case, a large container is useful in which you can completely immerse the kettle. For ten liters of hot water, three tablespoons of baking soda and vinegar essence are diluted. The resulting solution is poured into a suitable container and a kettle is placed there. Put everything on fire and bring to a boil. Enough to "boil" five minutes. Then let cool, rinse with running water and wipe dry.
Lemon acid
This method uses only a food product, no chemistry. Citric acid is used in two forms:
- dry powder. It can be purchased at any store;
- freshly squeezed lemon juice.
In the first case, three bags of powder are needed for three liters of warm water. If juice is used, then the same amount will require one citrus fruit. The resulting product is poured into a suitable container, and place the kettle there. We put the pan on the fire and simmer for ten minutes. After it is enough to wipe the surface with a sponge to remove any residual dirt, and wipe it dry.
Toothpaste
The product is applied to the toothbrush or to the hard surface of the washing sponge. Next, the contaminated area is thoroughly cleaned. After the procedure, the kettle is washed with running warm water. For cleaning, do not use toothpaste intended for whitening. These tubes add abrasive components that can scratch a smooth surface.
Mustard and mustard powder
The tool is widely used by housewives who prefer natural detergents to chemical detergents. Before the procedure, the surface must be heated. The contaminated area is moistened and mustard is applied on it, in a thick layer. The powder is rubbed into the surface and left for 20-30 minutes. After, wash the kettle with running water. If the result does not suit the hostess, then the procedure is repeated.
What else can you wash fat from the kettle
The people there are other ways to get rid of pollution on the surface of kitchen utensils. Some of them look quite exotic. In these ways, you can clean a nickel-plated kettle.
Cucumber pickle
This product of winter preparations is not only suitable for food. Brine will need a lot. A kettle or any other kitchen utensils in need of cleaning is placed in a suitable container. Everything is poured with pickle from under pickles, brought to a boil and left on low heat for half an hour.
Important! After this procedure, streaks of salt can remain, which can be easily removed with a sponge and running water.
PVA glue and laundry soap
In the matter of cleaning surfaces from greasy contaminants, such a combination can also be used. First, a mass of soap and glue is prepared. Calculations are made for four liters of water. Half a standard piece of laundry soap is passed through a coarse grater, four tablespoons of glue are added. All mix and fill with water. In the resulting product, the kettle is boiled for half an hour. After the procedure, the dishes are washed with warm water and wiped dry.
What cleaning methods to use on a stainless steel kettle
Features of this material is that any contamination is very noticeable. Even the smallest inclusions of fat or other substances will change the appearance of the kettle for the worse. But in such situations, one of the following methods will help:
- gently brush with soda. The kettle is preheated. To avoid scratches, use a slurry of soda. To do this, it is enough to dilute it in a small amount of water;
- prepare a solution at the rate of one teaspoon of soda per liter of water. In such a tool, you need to boil the kettle for half an hour. After cooling, the residual dirt is wiped with a sponge. To increase efficiency add a little vinegar;
- Coca-Cola drink is also used for cleaning. It is poured into a suitable container, placed in a kettle and boiled for half an hour.
Apply regular toothpaste. It is applied to the contaminated area and rubbed with a brush or soft sponge.
Leave Your Comment