Everyone knows that they must be very careful about gas equipment, because an incorrect attitude or connection leads to irreversible consequences. Any improper operation during installation can create a gas leak, therefore there is a danger of explosion.
Connection of the cylinder to the gas stove
If a person does not know the rules for connecting a gas cylinder, it is better to contact a qualified specialist. But, there are times when it is impossible to call a specialist, most likely such cases occur in suburban areas. If you follow the installation rules, then anyone can connect the cylinder.
Preparation of materials
Preparation for connecting the cylinder must have the required elements:
- A special stove for a country house, designed to install a cylinder.
- An appropriate container, i.e. a propane gas cylinder.
- A special mechanism for the normalized use of gas gear.
- The gas hose must have a length of not less than a meter, this is in accordance with the correct distance between the stove and the container with gas. At the same time, the hose must not stand upright. The best option for length is 2 meters.
- For a rubber hose, it is necessary to have fittings and screw clamps that are interconnected. If the hose is bellows, threaded adapters are needed.
- To check the connections between the hose and the cylinder, it is necessary to have a solution based on soap. After installation, it is used as a checking tool, if there are leaks, soap bubbles appear. Then you need to carefully review the connection.
Reference! For high-quality installation of the cylinder to the furnace, it is better to buy flexible hoses to avoid deformation and cracks leading to leakage.
How to choose a jet
Buying a gearbox is of great importance, it is on it that the flow of the combustible mixture depends. To make the gas pressure normal, the cylinder must be connected through a pressure reducer. On sale there are jets designed for gas use for domestic purposes. The main task of the pressure control system is a good fuel supply. When purchasing a jet, it must be selected for the individual dimensions of the gas furnace. It is advantageous to purchase a gearbox with a regulator, which allows you to set the desired setting. Such a fuel control device is suitable for cylinders with a twenty-liter capacity and more, where the gas outlet is very noticeable when used.
Reducers with the possibility of reverse regulation, it is recommended to use in the use of propane tanks. One requirement is that the gearbox should be sized to fit the cylinder used.
When choosing a gearbox, you need to take into account the temperature of the room in which the gas cylinder will be used. It often happens that the gas supply through the gearbox is hindered, since low temperature makes the gas liquid. In such cases, you need to buy a gearbox with a special heating system.
Features of the choice of equipment
The installation of the cylinder in an apartment, house or cottage should be carried out in accordance with all safety rules.
In the installation of gas equipment, there are several options. Let's consider three types of connection.
- Use of flexible hoses designed for a combustion substance. The installation of the gearbox takes place using a standard fitting and a screw clamp; a fitting is also installed at the inlet of the gas stove. To connect the pipeline, use a taper thread. When choosing a hose, you need to adhere to the length, it should not be more than one and a half meters, for a good overview of the condition of the shell and to identify all kinds of damage. You can use bellows hoses, they are resistant to temperature extremes and various damages. Installing flexible hoses through walls is strictly prohibited. If, however, such a need exists, you must adhere to all instructions, which means that the concrete hole in the wall must be with a special metal casing. In the middle, a smaller metal pipe should be present. The rest of the space can be filled with silicone-based sealant.
- Connection, has the installation of a gas valve, use it to stop the flow of the combustible mixture. A lock is also needed for furnace safety. Two types are used, a ball or cork valve used for periodic maintenance.
- Additional materials, this is a metering device, it is connected to the delivery link of gas. Accounting is necessary, because at a gas flow rate, the device reacts and delivers a combustible mixture. Such a device is installed on trunk networks.
- When connecting multiple cylinders, a connecting ramp is used. The device reduces gas evaporation and minimizes the risk of cooling in the jet. It is possible to install the device yourself, if there is a gas pipeline material.
Determining the location for a gas cylinder
For the correct installation of a gas cylinder and stove, there are some recommendations that will ensure the living of people. After all, the most important thing is safety. It is forbidden to install containers in rooms intended for residents of the house. Propane gas is heavier than air, at the slightest leak, gas will accumulate on the lower floors.
In summer cottages, an installation option is possible, which will protect the possibility of irreversible consequences in the use of a gas tank. It can be installed in a separate room or under a canopy in a metal cabinet. When installing, be sure to pay attention to the place where the cylinder will stand. From changes in temperature, safety in use also depends. If the iron cabinet is in direct sunlight, this threatens a high rise in temperature, which can be poorly displayed on the tank itself. Low temperatures are also undesirable, you can solve the problem by warming the iron cabinet or heating the cylinder with a self-regulation cable.
Step-by-step instructions for connecting a gas cylinder in the country
Some models of stoves cannot work from the supply of bottled gas. High pressure, this is the main reason, and in the burners we can notice the burning of yellow with the formation of soot.
When replacing jets for methane with nozzles for LPG, you can change this situation. They are the same in shape, only the diameter varies. When connecting a new stove, there should be a set of jets to reduce gas. In the absence of a set, jets can be purchased at reasonable prices.
The nozzle opening depends on the power of the burner and the gearbox itself. For the use of gas stoves, there are standard values for the diameter of the nozzle openings. Some manufacturers set their own diameter sizes, different nozzles from these sizes, may void the warranty.
Connecting a gas cylinder, it is possible with a full connection of pipes and hoses to properly connect them. Only then, the nut is screwed onto the cylinder valve, while it is well fixed with an adjustable wrench. After that, use a hose putting it on the fitting and clamp it with a hose clamp.
After assembling the installation, open the valve for supplying gas and using the gearbox set the desired gas supply, i.e. pressure. When gas passes through the system, it is necessary to grease all the connections with plenty of soap and water and check for gas leaks. If everything is fine, you can start lighting a fire. When the fire begins to smoke or has a yellowish color, it is necessary to reduce the gas supply, this is done using a gearbox. When setting the minimum fire, all burners should burn, if one of them goes out, you need to adjust the handle for low gas consumption on the stove tap. You can do this by raising more pressure on the gearbox.
Leave Your Comment