How to install and connect a washing machine

Washing machine connection

Everyone who has purchased a new washing machine is faced with the problem of connecting it. To begin with, you should carefully read the instructions that are included in the technique. If the car is not new, then check with the former owner about the features of use, or use our tips.

Unpacking

First you need to remove the packaging material, and get rid of the transport bolts. They are located on the back wall. For the empty holes remaining after the bolts, special plugs are provided that will hide the flaws.

Connection

After installation, it is necessary to connect the new machine to the sewage and water supply systems. If you previously had a washer, then there will be no problems with the connection, since all the necessary elements are prepared. If not, you will need to prepare water branches, a drain pipe and prepare everything you need to connect to electricity.

Preparing from scratch is a rather time-consuming process. It is very difficult to do all the work yourself, it is recommended to use the services of an experienced specialist. Skilled workers will quickly and easily perform proper work.

Water pipes

Manufacturers include a flexible hose for connecting to water and related components in a common kit. In some cases, it may be that the length of the hose is not enough. Then you need to purchase a suitable length in the store yourself.

Complete these requirements:

connect with the ability to block access to water;
install a filter to avoid clogging and excess pollution;
connection is made using special taps.

Important! Many are chasing savings and connecting the washer to hot water. This is not recommended if the model is not designed to be connected to hot water. This is due to the quality of the liquid, which leaves much to be desired, and in a few months your new equipment will be covered with a huge layer of scale. Connect it to cold water.

Drain

This is one of the simplest processes in the entire installation; it will not take much time. First you need to connect the drain hose to the machine. Be sure to fix it, otherwise the water will spill out. Connect the hose to the siphon on the sink.

Some make temporary drains by moving the hose to the bathroom, sink, or toilet. This option should not be used on an ongoing basis, as this creates a large number of inconveniences when using the bathroom.

Electricity grid

To connect the washing machine to the network, you must:

To get started, lay a separate line from the meter to the device. If you have already done the repair, use additional accessories made of plastic, they will make the appearance more attractive;
Use methods of protection against electricity. The washing machine is no different from other electrical appliances, so you should install it using protective devices. They are installed in the shield, and they, in turn, control power surges, thereby protect against extremes and save equipment;
Adhere to generally accepted installation rules, do not invent your own ways. It is recommended to contact a specialist who knows his job and will do everything according to the rules and safely.

Washing machine installation

Prepare the installation site in advance. Do not put any additional materials under the bottom of the washer, the exception is the mat that reduces vibration. The last step will be to adjust the height of the legs. Twist at the required height.

Important! The washing machine should be on a flat surface. Use the building level to make sure the floor is even.

Installation

Do you want to install the car, adhering to all the technologies? Stick to the rules:

the device is firmly installed on a flat floor;
use fasteners;
check the degree of fastener. To do this, shake the technique. If she does not move, then everything is done correctly.

Self-Installation Warranty

According to the law, the warranty period is valid for self-installation of the washing machine, provided that the defect turned out to be industrial, and not you damaged the machine.

Where is the best place to install?

There are several types of optimal installation locations:

restroom;
bathroom;
kitchen;
corridor.

One of the most uncomfortable places is the corridor. It is not intended to store any equipment. It does not involve sewer pipes, you have to do everything yourself, which creates great discomfort. If there is no other option, there is nothing else left but to overcome difficulties.

The toilet has all the necessary components that allow installation of equipment without any problems. But there is practically no place in them.

Important! Do not exclude this option, you can put the washing machine over the toilet. This will save space and will make some kind of unusualness in the interior.

If you prefer this option, take the preparation with complete seriousness. The shelf should be strong. After all, the weight of the washer is not small. Take care of stability so that the machine does not run away during the spin cycle. It is recommended to fix it to the wall.

The bathroom is installed most often. There is not much space there, but more than in the toilet. There are several options for installation. Next to the sink, and put a countertop on top, which will provide an additional working area. With a small height of the machine, install under the sink, also with the side of the bathroom. But this option is not the best, since in such rooms there is high humidity, which harms any technique.

The last option is the kitchen. Quite a good option, in addition, the car can be disguised as a working bedside table. It can be closed with doors or not. At the request of the owner.

There are no more successful or unsuccessful places, it all depends on the hostess, where it will be more convenient for her to use. The main criterion is a flat floor.

Preliminary preparation

To turn on and prepare for the use of a modern washing machine, you need to perform a few simple steps that do not cause absolutely any difficulties.

Although the criteria for each model are different, they have the same algorithm of actions. Proper use ensures a long service life of the machine for many years.

Modern devices are quite simple to use and do not have complex functions.

Load the wash. The workload of each machine individually. Do not exaggerate the indicated weight, otherwise the machine will soon fail from overload. Most modern models have a special sensor that detects excess weight in the drum;
Close the door to hear a click. If it has a vertical loading method, then close the hatch first;
Pour in detergent or other cleaning agent. Do not fall asleep a lot, otherwise a large amount of foam will form, which will overload the washing machine and damage things, they will remain in white stains. An insufficient amount will not rid the laundry of dirt. IMPORTANT: use the powder recommended by the manufacturer, get a measuring cup;
Open the water supply. There are different types of connections: to cold water, to hot, with a separate tank;
Insert the plug into the outlet to start;
Turn on. The functionality and way of inclusion for each model is different. The instructions for the device will accurately tell you all the details.
Run the process.

First wash

Manufacturers advise doing the first wash without throwing things in it. The fact is that the new washing machine has a specific smell that can be transmitted to clothing. Modern models allow you to perform the first wash with linen, but you should not risk it. Stick to the rules:

fulfill the above criteria, without clothes;
put a small amount of powder or detergent;
turn on;
choose the shortest time mode;
wait until the end of the procedure.

Select washing mode

When the above operations are done, you must select the appropriate program for washing. Each model has different functions, but in general they are similar to each other. Take into account the degree of pollution of linen and its characteristics: bedding, white items, wool or delicate.

There is a specific washing mode for each type with a suitable temperature. In some machines, you can independently select the criteria for washing: temperature, spin speed, number of rinses.

Note that intensive modes consume more energy than delicate ones. They should be used to wash only heavily soiled items. Try not to use them too often, with them the washer runs at full capacity, this can affect the service life.

Some useful tips

That the car served regularly for a long time. It is necessary to adhere to some rules:

Pay attention to the function of the equipment. If you notice strange sounds or malfunctions, immediately contact the masters. In no case do not try to make repairs yourself, just do harm. In any case, the new thing has a warranty card, it will provide free repair, just dial the phone number of your center;
Do not use powder intended for hand washing;
Do not exceed everything indicated in the specifications of the equipment;
Systematically clean pipes, drains and other elements that tend to get dirty and clogged;
Do not remove bolts for transport. In the future they may come in handy for the next transportation;
Fasten the temporary drain hose. To exclude the possibility of spillage of water throughout the room;
Carefully inspect pockets in clothes, excess objects can ruin the mechanism;
After all operations, leave the door open. With constant ventilation, mold and fungus will not start in the drum;
Use only high-quality and proven descaling agents.