How to remove the cartridge from the printer

Nowadays, printers are used to print documents and files. These are special peripheral devices connected to a computer and converting information from an electronic format in a database to paper. The process of any printer is to consistently perform a specific cycle. It consists of several main stages:

• Connecting power to the power supply and recognition of a computer program.
• Setting the print format and the quality of the resulting display.
• Loading cartridge and paper, start work.
• Sequential printing of document pages.

This happens every time you use the program. As can be seen from the described plan of manipulations, one of the main elements for the work is the cartridge. For normal printing, it is necessary to monitor its condition, the amount of ink ... After complete use, it is necessary to refill it or replace it with a new element.

Before you start installing a new element inside the printer, you must remove the old cartridge. Make it simple enough, especially if you have experience with technology. However, if you are performing the manipulation for the first time, it is better to use step-by-step instructions and carefully remove the cartridge from the printer case. To do this, follow the instructions:

1. Prepare a workplace, remove excess jewelry from your hands and roll up your sleeves for convenience and to prevent paint from entering.
2. Gently lift the printer cover, look inside the case. During operation, some parts may become very hot, be careful when touching the elements.
3. Find a cartridge, in some models it can be held at the expense of special clips. Gently pull them off without sudden movements, so as not to break.
4. After releasing the clips, pull on the special pens or notches on the cartridge. If it is stuck, contact the service center for help. Sharp and strong movements can damage the equipment.

When opening the case, the cartridges may continue moving for some time without applying ink; you should not stop them yourself. Wait a while before stopping the movement, then remove them.

IMPORTANT: Different versions of the equipment have their own characteristics when installing removable parts, for convenience, it is worth reading the instructions and watching the training videos.

It is necessary to take out the cartridge very carefully, because it contains many small parts, damage to which may adversely affect the print quality.

An important point when replacing the cartridge is the presence of the remaining paint. The problem is that the coloring composition inside the element can stain human skin and surrounding objects. In order to protect yourself and the elements of home interior, use the following tips:

• Prepare a workplace, put sheets of paper on the surface. Remove excess items from the table.
• Wear an old apron or cover your body with a towel. Always wear gloves on your hands, you can use old knitwear that you haven't used for a long time.
• Also stock up with rags or napkins to quickly remove any ink on your skin or clothing. Bring in paint remover when it dries.

IMPORTANT: Do not shake or turn the cartridge over to check the level of ink remaining, as this may cause ink leakage.

Of course, different types of paint or polymer powder (toner) have different effects and require special precautions. In some cases it will be useful to use personal protective equipment: rubber gloves, respirators, goggles.

After you have removed the old item, you can replace it with a new one, but to save money, you can use the dressing at home. This is easy enough to do even for a beginner, but some questions may arise when you first try. Answer them will help step-by-step execution plan manipulation:

1. Prepare the ink and syringe for insertion into the body of the cartridge.
2. Using a piston, fill the capacity of the syringe to the top mark. You should not fill to the limit, otherwise the paint can spill out.
3. After that, find the hole on the outer casing and insert the needle from the syringe into it. Begin gently and smoothly pouring ink into the container, filling it.
4. In the final step, seal all the available holes in the cartridge to prevent ink loss.

In the case of using a laser printer toner, the process will differ slightly:

1. Prepare personal protective equipment as polymer powder is highly toxic.
2. Remove the item from the printer case, inspect its walls. There should be a hole on the top cover. In its absence, a small hole in the wall is required to burn.
3. After that, using a special funnel, pour the powder into the free chamber.
4. Then close the hole with a plug or duct tape.
5. In some cases, it is necessary to apply a special chip (included) to the cartridge for the computer program and the printer to recognize it.

This option is suitable when using universal technology and a suitable coloring material for refueling. Some manufacturers limit the ability to work with non-native elements, you should consider this before you try to insert a filled cartridge. Information can be found on the body of the cartridge or in the manual for the printer.

IMPORTANT: You can not leave the printer for a long time without a cartridge, it can lead to malfunction and deterioration of print quality.

Therefore, it is recommended to quickly replace or refill paint in order to restore equipment operation in a short time.

After the filling is completed, the easiest action remains; now it is necessary to insert everything into its former places. To do this, do the following:

1. Disconnect the needle and syringe, rinse thoroughly until complete removal of the coloring matter.
2. Place the cartridges on a flat surface with the holes facing upwards so that the paint inside them is settled.
3. Now determine the previous place on the moving carriage. Turn off the printer so that the printheads do not move and do not interfere with the main process.
4. Pre-open the holes by removing the tape or tape closing them to allow ink to enter the nozzles.
5. Without sudden movements, insert the element into the device until a characteristic click appears, indicating that the installation is correct. Do not push with force.
6. If there are locking clips, slide them slightly to carefully install all the components.

So you can exactly refill the cartridge or install, if necessary, new equipment. This saves you money and time.

To improve performance and improve performance, read more information about your equipment and use the tips:

• Diagnose and troubleshoot operation.
• Periodically clean the construction elements from dust, dirt and foreign elements.
• When refilling cartridges do not mix different compositions, it spoils the printing machines.
• If the equipment does not support other people's parts, try not to use them.