Laying laminate with chamfer

Thanks to the simple method of flooring, the laminate is one of the popular floor coverings. Chamfered laminate looks like a natural board and has significant advantages over a conventional laminate. In order to qualitatively lay the lamellas with a chamfer, you need to know the specifics of this material, as well as the methods of laying and installation. This will help the photo diagram of how to properly lay a laminate with a chamfer.

Chamfered laminate, unlike the classic one, has a beveled straight edge. It differs both in appearance and operational characteristics. You can choose a coating of various shapes, sizes and depths of cut. There are two and four chamfer panels. Only opposite edges are beveled on a double-plank board, and on the four-faceted board they are machined around the entire perimeter. Chamfers also differ in the type of cut of the corners. The slice is curly and straight.

IMPORTANT!The most versatile coating suitable for any space is a laminate with four chamfers. Laying is allowed in almost any direction.

The following significant advantages of this product can be distinguished:

• Superior design. Outwardly, it is very similar to a natural massif, which gives almost unlimited possibilities in terms of selecting the design of the room. Laminate can simulate the structure of almost any wood.
• The chamfer closes the junction of the panels, so the seam of their connection is not visible. This is especially true during high humidity and changing seasons.
• Durability. With competent flooring, the service life of the coating is about 10 years.
• The increased durability. The top layer of the panel has a large thickness necessary for the formation of a bevel.
• Dock security. The beveled edge is treated with a special composition that enhances the strength of the product.
• There is the possibility of laying on uneven surfaces in moderate limits.

Among the shortcomings, a much higher cost can be distinguished in comparison with a conventional laminate. There is also a controversial opinion that dirt can accumulate in the openings between the boards.

Before you start laying the laminate, you should prepare all the necessary tools so that you do not get distracted in the future to find the right item. And also, sort out the types and options for styling and choose the right one. So, in the workspace should be the following devices:

1. measuring tape and rectangular ruler;
2. rubber mallet;
3. pencil;
4. jigsaw or saw;
5. screwdriver for mounting baseboards;
6. knife;
7. adhesive composition as necessary;
8. a vacuum cleaner;
9. wooden wedges.

There are two common ways of laying boards. Let's consider them in more detail. The laying method along the walls assumes that all boards are parallel to one of the walls. To visually expand the space, it is better to make the flooring parallel to a short wall.

In the method of diagonal flooring, panels are laid at an angle to the walls, which is determined only by the personal preferences of the customer. Among the disadvantages of this method, the fact that when laying there are many unused scraps. However, the drawing itself is more interesting compared to the first version of the flooring.

ATTENTION! The basic principles for laying a chamfered coating are exactly the same as for a conventional laminate. However, there are a number of features that must be considered.

Installation technology is common and straightforward. The following sequence of actions must be observed:

1. First you need to level the surface. In most cases, this step takes longer than the installation itself. Carefully eliminate all obvious irregularities in the concrete screed.
2. Lining flooring. It is pulled and fixed on the sides. Along the walls it is better to leave an empty space with a width of about 1.2 mm. The substrate is laid perpendicular to the material without overlap.
3. Also, wooden blocks are installed along the walls.
4. Installation should begin from the farthest corner. The panel is placed with a tongue in the direction of attachment of the second row. Then, on the second row, the panel is cut so as to get a spacing of joints.
5. The second row is placed a short segment and continue the installation of two rows at a time. The bottom of the mount is greased with a thin layer of glue. After fixing, the edge is cleaned with a clean rag.
6. The most popular and sought after is Lock. Joining the panels is done by tapping the end with a wooden block and a hammer. In this case, glue is not required. However, this method requires experience in aligning the joint.
7. Also popular is the CupsClic system, which allows you to connect the plates with a simple snap-lock. The beveled panel is inserted into the tongue at an angle of 40 degrees, and then returned to the horizontal position.

REFERENCE!When buying a laminate with a chamfer, special attention should be paid to the castle connection.

The greatest difficulty in flooring for beginners is the bypass of communications. To do this, place the board as close to the pipe as possible and draw its estimated location with a simple pencil. The distance from the edge of the wall to the center of the pipe can be measured using a ruler. Next, you need to saw through the hole of the intended shape. With the help of a jigsaw, you can cut straight sections, and a milling cutter of a round hole.

In this case, it is necessary that the diameter of the hole be 15-20 mm larger., I.e. so that the laminate is not abutted to the pipe. This will make it possible to raise the board and insert it into the lock. The cut piece must be preserved. In the future, it can be inserted into the resulting gap or use sealant. Also in stores you can buy special dies that cover the hole formed between the laminate and the pipe. Thanks to the wide range of colors, they can be matched to any color of the floor.

Manufacturers offer a wide selection of flooring with different characteristics. A chamfered coating is considered more wear-resistant and durable compared to a conventional laminate.