How to wash the hood in the kitchen from fat

Almost every kitchen has such a convenient technique as an exhaust system, which tends to get dirty and accumulate drops of fat on the walls and grill. This annoys all housewives, since such contaminants - especially old ones, are very difficult to remove.

What to do before washing the hood

It is impossible to wash the equipment efficiently, without certain knowledge and skills at home. The maximum that you can think of an inexperienced housewife is to wipe the walls and the grill with a rag, but this procedure will not remove the fat. First you need to understand how the structure is disassembled, because in assembled form it is not possible to clean it qualitatively.
Actions before washing the hood:

1. Be sure to disconnect the device from the power supply system before disassembling the device to avoid electric shock.
2. On the technique itself there should be a sticker with detailed instructions, in which there is a diagram for disassembling the structure. Usually there are latches on the sides, they must be snapped off and the top cover removed.
3. When cleaning equipment from grease, you should know that a hollow pipe that closes the hood with ventilation also needs to be washed, because greasy deposits accumulate in large quantities there too. Some craftsmen somehow got the hang of changing the corrugation once a month or two, thereby freeing themselves time from tedious washing. But not every technique will do such a trick, since you need to be able to do everything right, otherwise you can break some part and add problems to yourself.
4. Then remove the air filter. This is not difficult at all, it must also be washed.
5. The hood body itself cannot be removed, it is enough to wipe it with a sponge and proceed to washing the remaining parts.

IMPORTANT! Carefully read the instructions for your hood, as some models have turboair parts, that is, they must not be washed, they must be replaced.

How to clean the hood

In addition to cleaning the internal parts, it is necessary to wash the external housing of the equipment well. Not the built-in design is especially in need of washing, since the main part of such a hood does not hide in the kitchen, but is located directly above the gas stove and collects all the soot and fat on itself.
All this sticky substance settles on the walls of the body and it’s not difficult to wash it, but it’s quite inconvenient, since you have to wash while standing on a chair and go up. Detailed instructions for washing the case:

1. Moisten the surface with warm water.
2. Put a tablespoon of dishwashing gel on a hard sponge and apply on the body of the structure, make sure that liquid does not drip on the stove and floor.
3. Rub the surface with a hard and dense labial or brush and leave for 20-30 minutes.
4. With persistent contamination, lemon juice, a product with abrasive particles, such as soda, or a highly foaming agent for washing kitchen utensils and appliances will help.
5. After cleaning with a chemical compound, rinse thoroughly with water and walk dry with a rag.
6. Wipe the washed surface with a soft and dry cloth to remove all stains and give the hood shine.

IMPORTANT! Strongly old greasy crusts on the body can be removed using a plastic scraper, metal can not be used - it will damage and scratch the protective coating of the hood box.

How to wash the grate from the hood

The grill is one of the components of the structure, due to its mesh structure, it perfectly copes with cleaning air from particles of fat in the room, protects the internal parts and the mechanism of the unit from oil plaque. Taking all the dirt on itself, it becomes yellow, sticky and sooty in appearance - it is difficult to wash this structural element. Using certain efforts, the filter can be washed with a chemical agent or mechanical cleaning. In addition to expensive compounds, you can use laundry soap, it will very well corrode greasy deposits if you soak the wire rack in a soap solution and then wipe off any residual dirt with a brush.

IMPORTANT! To clean the filter with a soap solution, you need to choose 72% soap - it is easily rubbed on a coarse grater. After an hour of soaking in such a water, all the dirt will leave without difficulty, and the filter will shine again.

Soda solution treatment

Almost all companies - manufacturers of exhaust equipment, are advised to wash both the front panels and the internal parts and the filter only with mild soapy water or water diluted with dishwashing gel. However, this method does not work in all cases, it can be improved by adding baking soda to the composition.
Master Class:

1. Pour hot water into a bucket, you can from a kettle or dial from a tap.
2. Pour a quarter glass of soda and a spoonful of dishwashing detergent into a bucket of water.
3. Stir the mixture thoroughly with an improvised tool, but not by hand, until an abundant foam forms.
4. Place the cleaning filter in a container and leave to soak for 15 minutes.
5. Rub the product with a hard sponge or brush and rinse in the bathroom under the shower.
6. Dry with a cloth and put back in the hood.

The outer surface of the hood can also be soaked with this composition and left for several minutes, then wipe with a brush and rinse with warm water.

IMPORTANT! This method helps to clean the hood details almost always, but in especially advanced cases it is necessary to boil the filter in a soap-soda mixture for about 7-10 minutes, then the effect will be much better.

Use of ammonia

If the method with soda did not help, and the dirt remained on the filter and other parts of the kitchen appliance, then you can try to clean them with ammonia. For the composition, you need to mix in 4 liters of hot water half a tablespoon of alcohol. When working with the composition, it is necessary to wear a mask on the face, since the smell will be sharp and pungent, in addition, you can burn your mucous membrane, open the window or window. Soak the grate will take about 2 hours, then clean with a sponge and rinse in the shower. Leave to dry or wipe the moisture with a rag, paper towel.

How to wash an extract from fat with a soap solution

To make a solution, it is necessary to dissolve half a piece of 72% laundry soap in 3 liters of hot water. Small details of the hood should be boiled in a soap mixture, and soak the grill and mechanically treat with a scraper. The soap solution slowly breaks down fat and oil, and the remaining dirt after soaking can be cleaned with a plastic scraper or a hard brush.

Acetic or citric acid treatment

To process the parts of the unit, you need to take 9% table vinegar and rub all the details with it. The grill can be soaked in a solution of vinegar for 15 minutes.

IMPORTANT! It is necessary to clean in this way with gloves and with the window open.

To clean the lemon, you need to rid the lemon of the peel and cut into two parts. Wipe all the extraction mechanisms and the outer box with pulp, let the juice soak for 10-15 minutes. After just rinse with water and wipe with a napkin.

IMPORTANT! If the grate is heavily contaminated with sticky coating, then soak it in a solution of citric acid overnight.

How to clean the hood with a drainpipe cleaner

This method is used when you need to remove very old pollution that accumulated over the years. In a liquid solution, you can soak the grate and other small parts of the hood for 25 minutes and rinse under hot water. If it is a powder, then it is necessary to dilute it in water and then carry out the processing of the gadget.

How to wash a kitchen hood filter from grease

A variety of products can be used to clean this hood detail. Effective compositions based on charcoal. They contain many alkaline components that quickly deal with fat and oil. The method of cleaning the element entirely depends on the degree of contamination:

1. Mild degree. These are small droplets of fat of a rather light color, they have not frozen yet and it is easy to remove them. The grate in this case is soaked for 3-3 hours in a soap or soda solution. After brushing the remaining dirt with a brush. Wash the filter under hot water using detergent, gradually lowering the temperature. The main thing is that no detergents and chemicals are left on the filter, otherwise the mechanism may fail.
2. Hard to erase. A situation in which dark brown and red oil is on the hood. The most effective way is digestion. All parts are added to the water tank and add pieces of grated laundry soap and 3 tablespoons of baking soda and boil for 30 minutes.

A well-cleaned hood will delight the owners eye and work more productively. Capital cleaning is usually started every six months.